ELETECH

EM-51A Teach-n-Learn Animation Controller

Stereo MP3, near CD quality Trigger Input: 1 Relay Output: 3 Serial Port: 0 Input Voltage: 12 - 30 VDC Output Power: 15W x 2 EM51A is an MP3 player with synchronized device control. After being triggered the system starts to play the animation audio and toggle multiple control outputs at preset moments. These outputs are typically used to control electrical/electronic devices such lights, solenoids, motors, valves and etc. When not triggered the system can be configured to play ambient audio (a different MP3 file) continuously. The animation can be triggered with push buttons, pressure floor mats, switch/relay closures, alarm/motion sensors, PLCs and etc. Two trigger inputs are provided (although they trigger the same animation program): one for dry contact closures and the other is opto-isolated. Trigger polarity can be reversed with a DIP switch setting. EM51A features a high efficiency low heat class D power amplifier with thermal and short circuit protection (automatic recovery). Line level output is also available for feeding external power amplifiers in case more amplification is needed than the internal one can provide. EM51A is totally self-contained in terms of operation. Installation is quick and easy thanks to the detachable screw terminals. No special tool is required for wire connection. Teach-n-Learn™ Programming Method EM51A allows the user to do animation programming with nothing but the controller itself. Built-in push buttons are used to activate outputs and play out the animation for the controller to learn while the audio is played simultaneously. A DIP switch setting can lock the system and prevent the erasure of the animation program. EM-51AS (Simplified Version) EM51AS is a simplified version that requires no animation programming. When triggered, the unit simply plays the audio and automatically turns on all three relays. When the audio ends, the relays are turned off automatically.
Available Models EM-51A: standard EM-51AS: simplified operation Downloads EM-51A User’s Manual EM-51AS User’s Manual Typical Applications Museum Animated Exhibits Haunted House Props Theme Park Story Teller Displays Optional Accessories Power Amplifier AMP-1502HV AMP-1502HV is a high efficiency class D power amplifier with a maximum output of 15W per channel in stereo mode, or 55W in BTL mono mode. Constant-Voltage Transformer HVTR1 bridges between low impedance and high voltage audio devices so that low impedance amplifiers can drive high voltage speakers, and vice versa. Digital Switch Timer TMR-08 TMR-08 is a 7-day programmable switch timer with 8 internal relays for triggering QuikWave audio players at preset times of the day, once or multiple times a day and in any order.
ELETECH

EM-51A Teach-n-Learn Animation Controller

Stereo MP3, near CD quality Trigger Input: 1 Relay Output: 3 Serial Port: 0 Input Voltage: 12 - 30 VDC Output Power: 15W x 2 EM51A is an MP3 player with synchronized device control. After being triggered the system starts to play the animation audio and toggle multiple control outputs at preset moments. These outputs are typically used to control electrical/electronic devices such lights, solenoids, motors, valves and etc. When not triggered the system can be configured to play ambient audio (a different MP3 file) continuously. The animation can be triggered with push buttons, pressure floor mats, switch/relay closures, alarm/motion sensors, PLCs and etc. Two trigger inputs are provided (although they trigger the same animation program): one for dry contact closures and the other is opto-isolated. Trigger polarity can be reversed with a DIP switch setting. EM51A features a high efficiency low heat class D power amplifier with thermal and short circuit protection (automatic recovery). Line level output is also available for feeding external power amplifiers in case more amplification is needed than the internal one can provide. EM51A is totally self-contained in terms of operation. Installation is quick and easy thanks to the detachable screw terminals. No special tool is required for wire connection. Teach-n-Learn™ Programming Method EM51A allows the user to do animation programming with nothing but the controller itself. Built-in push buttons are used to activate outputs and play out the animation for the controller to learn while the audio is played simultaneously. A DIP switch setting can lock the system and prevent the erasure of the animation program. EM-51AS (Simplified Version) EM51AS is a simplified version that requires no animation programming. When triggered, the unit simply plays the audio and automatically turns on all three relays. When the audio ends, the relays are turned off automatically.
Available Models EM-51A: standard EM-51AS: simplified operation Downloads EM-51A User’s Manual EM-51AS User’s Manual Typical Applications Museum Animated Exhibits Haunted House Props Theme Park Story Teller Displays Optional Accessories Power Amplifier AMP-1502HV AMP-1502HV is a high efficiency class D power amplifier with a maximum output of 15W per channel in stereo mode, or 55W in BTL mono mode. Constant-Voltage Transformer HVTR1 bridges between low impedance and high voltage audio devices so that low impedance amplifiers can drive high voltage speakers, and vice versa. Digital Switch Timer TMR-08 TMR-08 is a 7-day programmable switch timer with 8 internal relays for triggering QuikWave audio players at preset times of the day, once or multiple times a day and in any order.